Superplasticizer

From Justapedia, unleashing the power of collective wisdom
Jump to navigation Jump to search

Superplasticizers (SPs), also known as high range water reducers, are additives used in making high strength concrete. Plasticizers are chemical compounds that enable the production of concrete with approximately 15% less water content. Superplasticizers allow reduction in water content by 30% or more. These additives are employed at the level of a few weight percent. Plasticizers and superplasticizers retard the curing of concrete.[1]

Generally, superplasticizer can be classified into such types:purified lignosulfonates, carboxylate synthetic polymers, sulfonated synthetic polymers and synthetic polymers with mixed functionality cementitious materials.[2]

SPs are used where well-dispersed particle suspension is required to improve the flow characteristics (rheology) of suspensions such as in concrete applications. Their addition to concrete or mortar allows the reduction of the water to cement ratio without negatively affecting the workability of the mixture, and enables the production of self-consolidating concrete and high performance concrete. They greatly improve the performance of the hardening fresh paste. The strength of concrete increases when the water to cement ratio decreases.[3]

The addition of SP in the truck during transit is a fairly modern development within the industry. Admixtures added in transit through automated slump management systems, such as Verifi,[4] allow concrete producers to maintain slump until discharge without reducing concrete quality.

Mechanism

Phosphonic acid-terminated polyethers are effective superplasticizers.[5]

Traditional plasticizers are lignosulphonates as their sodium salt.[5] Superplasticizers are synthetic polymers. Compounds used as superplasticizers include sulfonated naphthalene formaldehyde condensate, sulfonated melamine formaldehyde condensate, acetone formaldehyde condensate and polycarboxylate ethers. Cross-linked melamine- or naphthalene-sulfonates, referred to as PMS (polymelamine sulfonate) and PNS (polynaphthalene sulfonate), respectively, are illustrative. They are prepared by crosslinking of the sulfonated monomers using formaldehyde or by sulfonating the corresponding crosslinked polymer.[1][6]

Idealized structure of naphthalenesulfonate/formaldehyde polymer used as a superplasticizer.
File:Suspension PCE.jpg
Polycarboxylate displacement on a multi-phase suspension.

The polymers that serve as plasticizers exhibit surfactant properties. They are often ionomers. They function as dispersants to minimize particle segregation (gravel, coarse and fine sands). The negatively charged polymer backbone adsorbs on the positively charged colloidal particles. However, engineers do not fully understand their working mechanisms, resulting, in certain cases, cement-superplasticizer incompatibilities.[7]

See also

References

  1. ^ a b Gerry Bye, Paul Livesey, Leslie Struble (2011). "Admixtures and Special Cements". Portland Cement: Third edition. doi:10.1680/pc.36116.185 (inactive 31 July 2022). ISBN 978-0-7277-3611-6.{{cite book}}: CS1 maint: DOI inactive as of July 2022 (link) CS1 maint: multiple names: authors list (link)
  2. ^ Lu, Bing; Weng, Yiwei; Li, Mingyang; Qian, Ye; Leong, Kah Fai; Tan, Ming Jen; Qian, Shunzhi (May 2019). "A systematical review of 3D printable cementitious materials". Construction and Building Materials. 207: 477–490. doi:10.1016/j.conbuildmat.2019.02.144. hdl:10356/142503. S2CID 139995838.
  3. ^ Houst, Yves F.; Bowen, Paul; Perche, Francois; Kauppi, Annika; Borget, Pascal; Galmiche, Laurent; Le Meins, Jean-Francois; Lafuma, Francoise; Flatt, Robert J.; Schober, Irene; et al. (2008). "Design and Function of Novel Superplasticizers for more Durable High performance Concrete (Superplast Project)". Cement and Concrete Research. 38 (10): 1197–1209. doi:10.1016/j.cemconres.2008.04.007.
  4. ^ "In-transit concrete management system | GCP Applied Technologies".
  5. ^ a b R. Flatt, I. Schober (2012). "Superplasticizers and the rheology of concrete". In Nicolas Roussel (ed.). Understanding the Rheology of Concrete. Woodhead. ISBN 978-0-85709-028-7.
  6. ^ Mollah, M. Y. A.; Adams, W. J.; Schennach, R.; Cocke, D. L. (2000). "A Review of Cement-superplasticizer interactions and their Models". Advances in Cement Research. 12 (4): 153–161. doi:10.1680/adcr.2000.12.4.153.{{cite journal}}: CS1 maint: uses authors parameter (link)
  7. ^ Ramachandran, V.S. (1995) Concrete Admixtures Handbook – Properties, Science, and Technology, 2nd Edition, William Andrew Publishing, ISBN 0-8155-1373-9 p. 121