MVP Model 3
| Model 3 | |
|---|---|
| |
| Model 3 on display | |
| Role | Amphibious light sport aircraft |
| Manufacturer | MVP.Aero Inc. |
| Designer | Mike Van Staagen |
| Introduction | 2014 |
| Status | Cancelled |
The MVP Model 3 was a prototype American "triphibian" light-sport aircraft, displayed in mockup form in 2014. The aircraft was under development by MVP.Aero Inc. of Delaware. Its developer has since ceased operations.[1]
The company based its design and engineering team in Duluth, Minnesota, with management and administration in Minneapolis.[2] In January 2016, it was announced that the plane would be built in Brunswick, Maine.[3]
Design and development
The MVP Model 3 was designed to operate on land, water, snow and ice. The floor panels were intended to be rearranged to accommodate fishing or camping. The design would be marketed in several versions, including the E-AB, E-LSA, and S-LSA.[4] The aircraft was a two-seater in side-by-side configuration with a pusher propeller and folding wings, which were to be constructed with carbon-fiber composite spars and covered with fabric. The balance of the airframe was constructed from a combination of carbon fiber and fiberglass. Electric thrusters helped the aircraft maneuver in the water.[5][6][7]
The design alloeds the canopy to be raised on a four bar system to sit above the engine cowling. This left the cockpit area open for fishing from and can also allow mounting of a tent for camping, with the floor panels inserted. With the canopy fully open the engine was intended to still run for water maneuvering.[7]
The Model 3's lead designer, Mike Van Staagen, is a former Cirrus Aircraft engineer who played a key role in the design and development of the Cirrus Vision SF50 personal jet, as well as the Cirrus SR20 and SR22 composite light aircraft.[8]
Variants
- Model 3 E-AB
- Model 3 E-LSA
- Model 3 S-LSA
Specifications (MVP Model 3)
Data from Company[4]
General characteristics
- Crew: one
- Capacity: one passenger
- Length: 23 ft 9 in (7.24 m) wings extended, 8.1 m (26 ft 7 in) wings folded
- Wingspan: 36 ft 0 in (10.97 m)
- Width: 8 ft 0 in (2.44 m) wings folded
- Fuel capacity: 26 US gal (22 imp gal; 98 l)
- Powerplant: 1 × Rotax 914 horizontally-opposed piston aircraft engine, 115 hp (86 kW)
Performance
- Cruise speed: 104 kn (120 mph, 193 km/h) at sea level
- Stall speed: 41 kn (47 mph, 76 km/h) with full flaps
- Rate of climb: 1,000 ft/min (5.1 m/s) at sea level
- Wing loading: 11 lb/sq ft (54 kg/m2)
See also
Aircraft of comparable role, configuration, and era
- Vickers Aircraft Wave
- ATOL 650 LSA
- ICON A5
- LISA Akoya
- Progressive Aerodyne SeaRey
- Osprey 2
- Quikkit Glass Goose
References
- ^ Mercedes Streeter (8 February 2022). "This Plane Tried To Be A Camper And A Fishing Boat At The Same Time". Jalopnik.
- ^ "MVP - About Us". Retrieved 8 April 2016.
- ^ "'Flying boat' maker lands in Brunswick". Retrieved 8 April 2016.
- ^ a b "MVP Model 3". Archived from the original on 1 August 2014. Retrieved 1 August 2014.
- ^ James Wynbrandt (28 July 2014). "MVP.aero announces new LSA triphibian". Airventue Today. p. 12.
- ^ "MVP Amphib Adds Versatility". Retrieved 29 June 2014.
- ^ a b Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, page 69. Flying Pages Europe SARL, 2015. ISSN 1368-485X
- ^ Stephen Pope (July 2014). "MVP Amphibian Offers Ultimate Versatility". Flyingmag.com.