Chasqui I
![]() | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
![]() Chadqui I | |
Mission type | Scientific |
---|---|
Operator | National University of Engineering |
Website | www |
Spacecraft properties | |
Bus | 1U CubeSat |
Launch mass | 1 kilogram (2.2 lb) |
Start of mission | |
Launch date | Not recognized as a date. Years must have 4 digits (use leading zeros for years < 1000). UTC |
Orbital parameters | |
Reference system | Geocentric |
Regime | Low Earth |
Chasqui I is a one-kilogram nano satellite project that was launched from the International Space Station during a spacewalk on August 18, 2014.[1] The concept satellite was equipped with two cameras, one for visible light and one infrared, equipped to take photos of the Earth.
The Chasqui I was developed by students at Peru's National University of Engineering (UNI) with assistance from the Russian Southwest State University (SWSU), Kursk. It was part of an educational project to acquire the experience and ability in developing satellites.
The name of the project refers to the Chasqui, who served as messengers in the Inca Empire.
General objectives
Most of UNI's objectives in satellite technology were completed nano satellite Cubesat. Plans for the satellite Chasqui I included taking pictures of the Earth, with transmission to a ground station.
Specific objectives include:[citation needed]
- Establish contact and support to other universities and / or institutions involved in such projects.
- To deepen the knowledge in information and communications technologies emerging.
- To lead such projects in Latin America.
- To demonstrate and validate new technologies.
Goals include:[citation needed]
- Design of the project profile.
- Funding.
- Capacity building.
- Implementation of the Laboratory.
- Development of the project.
- Testing integrated.
- Guidelines.
- Operation
Project
The Nanosatellite Chasqui I research project is a satellite created by Peru, along with the previous launched satellites, and gives the opportunity to open new application areas specific to its own geographical and social reality. It is also from an academic point of view a tool that facilitates collaboration between the various faculties of the university trains students and teachers with real world experience in satellite, allowing technological advances in the aerospace industry in the country. The development of small-scale satellites like Chasqui I gives way to the various opportunities of access to space with lower costs and development time. For this reason, various universities, companies and government organizations in the world show interest in developing nanosatellites that allow to carry out experiments and scientific missions. The educational benefits of the project can be emphasized in training camp for future engineers and scientists.
The research project Chasqui I a Nanosatellite based on the CubeSat technology, the mass of the satellite is less than 1 kg and it has a volume of up to 1 Lt. The project demonstrates its utility in imaging land, more specifically from the Peruvian region, using a CMOS camera that seeks to distinguish between fertile land and uncultivated areas. To minimize the cost of development and construction, Chasqui I was constructed using commercial components. However, the very fact of using these components in a space environment presents new challenges in relation to tolerance to temperature and radiation and also presents increased requirements in areas related to redundancy when designing hardware and software components. Additionally, Chasqui I will use the amateur radio frequency, making it possible to be accessed by an entire amateur radio community can be located throughout the country, increasing the educational potential of the project. The project also includes the implementation of a ground station that allows monitoring of Chasqui I, as well as monitoring other small satellites of universities.
Peru has a large geographical diversity, which makes it very difficult to constantly monitor the situation of certain events, whether natural or man-made, such as permanent snow melting, deforestation of the Amazon, the protection of habitats of endangered species, combating narco-terrorism, surveillance of borders and territorial sea, the prediction and mitigation of natural disasters, etc. It is in this context that space technology is presented as an alternative to solve problems of national interest. UNI, with its project Chasqui I, are taking steps in the process of addressing problems such as crop monitoring and telecommunications areas.
The project Chasqui I, which initially was formative to learn the CubeSat technology, has evolved[when?] into a technological and scientific challenge for all members of the project. It is expected[by whom?] that Chasqui I allows to plant the foundations for future work in the area of small satellites and, to increase their size or number, give rise to satellite projects in different categories, in areas such as: communications, meteorology, remote sensing, earth images, navigation and oceanography.
Outline of the Project Development Modules
Project Modules
Mechanical Structure – EMEC
The research group module mechanical structure (EMEC) is responsible for reviewing the state of art, comparative analysis of existing cases to the pico-satellite design and manufacture our own model based on the Standard Cubesat.
The pico-satellite contains the following modules:[citation needed]
- Central Control and Management Information (CCMI)
- Unit Power and Thermal Control (PCT)
- Communications System (SICOM)
- Imaging Management System (SIMA)
- System Identification and Attitude Control (SDCA)
Central Control and Information Management – CCMI
This module manages and monitors information from all subsystems Chasqui I. The module to meet the goals set must have within it a processor (called OBC: On-Board Computer), which fulfills the following functions in each module:[citation needed]
- Camera (SIMA): Regulates the satellite image capture and storage in an external memory.
- Attitude (SDCA): Orders and confirms, stabilization and spatial orientation.
- Power (PCT): Manages and monitors satellite states of physical variables such as temperature, voltage and current.
- Communication (SICOM): Ground-station receives orders and sends the information of camera data and pico-satellite states
The data managed are:[citation needed] Data from the camera, Data Maintenance and commands.
Power and Thermal Control – PCT
The first subsystem is the Power and is responsible for receiving, processing, storing, and distributing power to other subsystems in the Chasqui I. The objective of this subsystem is to ensure electricity supply for Chasqui I give it the energy needed at the right time.
The second subsystem is the Thermal Control and he is responsible for maintaining the temperature of the batteries and other components of the satellite in its operating range, in order to ensure the functioning of Chasqui I. The most critical task of this subsystem is to maintain the batteries to operate within its limit of operation (0 °C to 20 °C.). Through heaters specifically designed and constructed at the National University of Engineering.
Both subsystems were designed and built at the National Engineering University.[citation needed]
Communication System – SICOM
The TT & C module is responsible to provide a means of communication between the peak itself and the satellite earth station.[citation needed]
Image Acquisition System – SIMA
The main objective of the research group is to obtain photographs of the Earth from Chasqui I. SIMA The module consists of two cameras, one visible range and the other in the near infrared range. Digital information is collected by the Central Control Module and Management Information (CCMI) and then sent to the Earth Station (ESTER).
Additionally, the Group is responsible for processing digital images obtained by the Chasqui I.
System Identification and Attitude Control – SDCA
The SDCA maintains the pico-satellite stabilization and guidance to a desired direction when necessary. Specifically, we can say that SDCA is responsible for:[citation needed]
- Stabilize the pico-satellite after leaving the deployer through reduction (within 0.1rad / s) and control their angular velocities.
- Maintain a pointing accuracy of 3 degrees for taking pictures of Peru and, if technically possible, having a wide coverage of South America through maneuvers of 30 degrees in roll (roll) and 30 degrees pitch (pitch).
- Maintain a less demanding pointing accuracy (e.g. 20 degrees) to enable up / down data between the pico-satellite and ground station.
The SDCA enables the pico-satellite to determine its attitude, calculate the correction required to achieve the desired orientation and execute the necessary maneuvers using the actuators. The attitude determination system will use magnetometers, sun sensors and attitude determination algorithms for estimating positions and angular velocities. Using GPS and gyroscopes as sensors for determining attitude will also be evaluated.[citation needed] The attitude control system will use electromagnetic coils and permanent magnets as actuators, forming what are known as magnetorquers. The magnetorquers are especially important for the stabilization of the pico-satellite once it leaves the deployer. The inclusion of the permanent magnet can have a system of active-passive control. More than one control law will be studied for possible implementation. The use of magnetic materials and hysteretic also be evaluated.[citation needed]
Ground Station – ESTER
This subsystem is not part of the satellite itself, but its existence and operation is necessary to achieve the objectives of Chasqui I. The set of facilities and wireless communication (radio) needed to communicate with the Chasqui I, and any satellite.
The main functions of this module are:[citation needed]
- Follow-up: radioforo hear the beacon or satellite for its position.
- Telemetry: Request state variables (temperature, voltage, etc..) To monitor and validate the satellite orbit calculation.
- Commando: Order to extend the satellite antenna; order reset the system, order the taking and sending photos.
System Orbits – SORS
This module aims to simulate the trajectory of Chasqui I, which is calculated using differential equations of motion, which are then solved in parallel using two programs: Delphi and Matlab.
This simulation is accomplished by taking into consideration the following phases:[citation needed]
- Considering the Earth as an inertial reference system, the quadrupole term of the gravitational potential and using Newton's second law, we obtained the equations of motion are nonlinear equations.
- Using the Runge-Kutta of order 4 with the Delphi program to solve the equations of motion energy remaining constant.
- Phase 2 was repeated with the Matlab program and with this software are carried out trajectory simulations Chasqui I.
Module Integration and Testing – MIP
The module aims to achieve the assembly of components developed by different modules of the project as circuit boards, cameras, batteries, antennas, sensors, and magnetorquers.
This goal can be achieved:[citation needed]
- Optimizing surfaces, volumes, masses, finding center of gravity, center of mass.
- Planning and conducting standardized testing requirements.
- Perform field tests planned in the project.
See also
References
- ^ "Photos: Cosmonauts Take Spacewalk to Launch Peruvian Satellite". Space.com. 18 August 2014.
External links
- National University of Engineering Home of the public university located in Lima Peru.
- CTIC – UNI Center for Information & Communication Technologies (CTIC-UNI).
- Project Official Site Chasqui 1 All information relating to the project.
![](https://upload.wikimedia.org/wikipedia/commons/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Articles with short description
- Short description with empty Wikidata description
- Articles lacking reliable references from January 2010
- All articles lacking reliable references
- Articles that may contain original research from January 2010
- All articles that may contain original research
- Justapedia articles with possible conflicts of interest from January 2010
- Articles with invalid date parameter in template
- Justapedia articles needing copy edit from April 2022
- All articles needing copy edit
- Justapedia articles in need of updating from April 2022
- All Justapedia articles in need of updating
- Justapedia articles with style issues from April 2022
- All articles with style issues
- Articles with multiple maintenance issues
- All articles with unsourced statements
- Articles with unsourced statements from December 2013
- All articles with vague or ambiguous time
- Vague or ambiguous time from December 2013
- Articles with specifically marked weasel-worded phrases from December 2013
- Articles with unsourced statements from September 2022
- Commons category link is locally defined
- Use American English from January 2014
- All Justapedia articles written in American English
- Student satellites
- CubeSats