Hydroponics
![](https://upload.wikimedia.org/wikipedia/commons/thumb/9/99/Wiktionary-logo-en-v2.svg/40px-Wiktionary-logo-en-v2.svg.png)
Hydroponics[1] is a type of horticulture and a subset of hydroculture which involves growing plants, usually crops, without soil, by using water-based mineral nutrient solutions in aqueous solvents. Terrestrial or aquatic plants may grow with their roots exposed to the nutritious liquid or in addition, the roots may be mechanically supported by an inert medium such as perlite, gravel, or other substrates.[2]
Despite inert media, roots can cause changes of the rhizosphere pH and root exudates can affect rhizosphere biology and physiological balance of the nutrient solution by secondary metabolites.[3][4][5] Transgenic plants grown hydroponically allow the release of pharmaceutical proteins as part of the root exudate into the hydroponic medium.[6]
The nutrients used in hydroponic systems can come from many different organic or inorganic sources, including fish excrement, duck manure, purchased chemical fertilizers, or artificial nutrient solutions.[7]
Plants are commonly grown hydroponically in a greenhouse or contained environment on inert media, adapted to the controlled-environment agriculture (CEA) process.[8] Plants commonly grown hydroponically include tomatoes, peppers, cucumbers, strawberries, lettuces, and cannabis, usually for commercial use, and Arabidopsis thaliana, which serves as a model organism in plant science and genetics.[9]
Hydroponics offers many advantages, notably a decrease in water usage in agriculture. To grow 1 kilogram (2.2 lb) of tomatoes using intensive farming methods requires 214 liters (47 imp gal; 57 U.S. gal) of water;[10] using hydroponics, 70 liters (15 imp gal; 18 U.S. gal); and only 20 liters (4.4 imp gal; 5.3 U.S. gal) using aeroponics.[11]
Hydroponic cultures lead to highest biomass and protein production compared to other growth substrates, of plants cultivated in the same environmental conditions and supplied with equal amounts of nutrients.[12]
Since hydroponics takes much less water and nutrients to grow produce, it could be possible in the future for people in harsh environments with little accessible water to grow their own food.[13][8]
Hydroponics is not only used on earth, but has also proven itself in plant production experiments in space.[14]
History
The earliest published work on growing terrestrial plants without soil was the 1627 book Sylva Sylvarum or 'A Natural History' by Francis Bacon, printed a year after his death. As a result of his work, water culture became a popular research technique. In 1699, John Woodward published his water culture experiments with spearmint. He found that plants in less-pure water sources grew better than plants in distilled water. By 1842, a list of nine elements believed to be essential for plant growth had been compiled, and the discoveries of German botanists Julius von Sachs and Wilhelm Knop, in the years 1859–1875, resulted in a development of the technique of soilless cultivation.[15] To quote von Sachs directly: "In the year 1860, I published the results of experiments which demonstrated that land plants are capable of absorbing their nutritive matters out of watery solutions, without the aid of soil, and that it is possible in this way not only to maintain plants alive and growing for a long time, as had long been known, but also to bring about a vigorous increase of their organic substance, and even the production of seed capable of germination."[16] Growth of terrestrial plants without soil in mineral nutrient solutions was later called "solution culture" in reference to "soil culture". It quickly became a standard research and teaching technique in the 19th and 20th centuries and is still widely used in plant nutrition science.[17]
Around the 1930s plant nutritionists investigated diseases of certain plants, and thereby, observed symptoms related to existing soil conditions such as salinity. In this context, water culture experiments were undertaken with the hope of delivering similar symptoms under controlled laboratory conditions.[18] This approach forced by Dennis Robert Hoagland led to innovative model systems (e.g., green algae Nitella) and standardized nutrient recipes playing an increasingly important role in modern plant physiology.[19] In 1929, William Frederick Gericke of the University of California at Berkeley began publicly promoting that the principles of solution culture be used for agricultural crop production.[20][21][22] He first termed this cultivation method "aquiculture" created in analogy to "agriculture" but later found that the cognate term aquaculture was already applied to culture of aquatic organisms. Gericke created a sensation by growing tomato vines twenty-five feet (7.6 metres) high in his back yard in mineral nutrient solutions rather than soil.[23] He then introduced the term Hydroponics, water culture, in 1937, proposed to him by W. A. Setchell, a phycologist with an extensive education in the classics.[1][24] Hydroponics is derived from neologism υδρωπονικά (derived from Greek ύδωρ=water and πονέω=cultivate), constructed in analogy to γεωπονικά (derived from Greek γαία=earth and πονέω=cultivate),[25] geoponica, that which concerns agriculture, replacing, γεω-, earth, with ὑδρο-, water.[15]
Despite initial successes, however, Gericke realized that the time was not yet ripe for the general technical application and commercial use of hydroponics for producing crops.[26] He also wanted to make sure all aspects of hydroponic cultivation were researched and tested before making any of the specifics available to the public.[27] Reports of Gericke's work and his claims that hydroponics would revolutionize plant agriculture prompted a huge number of requests for further information. Gericke had been denied use of the university's greenhouses for his experiments due to the administration's skepticism, and when the university tried to compel him to release his preliminary nutrient recipes developed at home, he requested greenhouse space and time to improve them using appropriate research facilities. While he was eventually provided greenhouse space, the university assigned Hoagland and Arnon to re-evaluate Gericke's claims and show his formula held no benefit over soil grown plant yields, a view held by Hoagland. Because of these irreconcilable conflicts, Gericke left his academic position in 1937 in a climate that was politically unfavorable and continued his research independently in his greenhouse. In 1940, Gericke, whose work is considered to be the basis for all forms of hydroponic growing, published the book, Complete Guide to Soilless Gardening. Therein, for the first time, he published his basic formula involving the macro- and micronutrient salts for hydroponically-grown plants.[28]
As a result of research of Gericke's claims by order of the Director of the California Agricultural Experiment Station of the University of California, Claude Hutchison, Dennis Hoagland and Daniel Arnon wrote a classic 1938 agricultural bulletin, The Water Culture Method for Growing Plants Without Soil, one of the most important works on solution culture ever, which made the claim that hydroponic crop yields were no better than crop yields obtained with good-quality soils.[29] Ultimately, crop yields would be limited by factors other than mineral nutrients, especially light and aeration of the medium.[30] However, in the introduction to his standard work on hydroponics, published two years later, Gericke pointed out that the results published by Hoagland and Arnon in comparing the yields of experimental plants in sand, soil and solution cultures were based on several systemic errors ("...these experimenters have made the mistake of limiting the productive capacity of hydroponics to that of soil. Comparison can be only by growing as great a number of plants in each case as the fertility of the culture medium can support").[28]
For example, the Hoagland and Arnon study did not adequately appreciate that hydroponics has other key benefits compared to soil culture including the fact that the roots of the plant have constant access to oxygen and that the plants have access to as much or as little water and nutrients as they need.[28][31] This is important as one of the most common errors when cultivating plants is over- and underwatering; and hydroponics prevents this from occurring as large amounts of water, which may drown root systems in soil, can be made available to the plant in hydroponics, and any water not used, drained away, recirculated, or actively aerated, eliminating anoxic conditions in the root area. In soil, a grower needs to be very experienced to know exactly with how much water to feed the plant. Too much and the plant will be unable to access oxygen because air in the soil pores is displaced, which can lead to root rot; too little and the plant will undergo water stress or lose the ability to absorb nutrients, which are typically moved into the roots while dissolved, leading to nutrient deficiency symptoms such as chlorosis. Eventually, Gericke's advanced ideas led to the implementation of hydroponics into commercial agriculture while Hoagland's views and helpful support by the University prompted Hoagland and his associates to develop several new formulas for mineral nutrient solutions, universally known as Hoagland solution.[32]
One of the earliest successes of hydroponics occurred on Wake Island, a rocky atoll in the Pacific Ocean used as a refueling stop for Pan American Airlines. Hydroponics was used there in the 1930s to grow vegetables for the passengers. Hydroponics was a necessity on Wake Island because there was no soil, and it was prohibitively expensive to airlift in fresh vegetables.[33]
From 1943 to 1946, Daniel I. Arnon served as a major in the United States Army and used his prior expertise with plant nutrition to feed troops stationed on barren Ponape Island in the western Pacific by growing crops in gravel and nutrient-rich water because there was no arable land available.[34]
In the 1960s, Allen Cooper of England developed the nutrient film technique.[35] The Land Pavilion at Walt Disney World's EPCOT Center opened in 1982 and prominently features a variety of hydroponic techniques.
In recent decades, NASA has done extensive hydroponic research for its Controlled Ecological Life Support System (CELSS). Hydroponics research mimicking a Martian environment uses LED lighting to grow in a different color spectrum with much less heat. Ray Wheeler, a plant physiologist at Kennedy Space Center's Space Life Science Lab, believes that hydroponics will create advances within space travel, as a bioregenerative life support system.[36]
As of 2017, Canada had hundreds of acres of large-scale commercial hydroponic greenhouses, producing tomatoes, peppers and cucumbers.[37]
Due to technological advancements within the industry and numerous economic factors, the global hydroponics market is forecast to grow from US$226.45 million in 2016 to US$724.87 million by 2023.[38]
Techniques
There are two main variations for each medium: sub-irrigation and top irrigation[specify]. For all techniques, most hydroponic reservoirs are now built of plastic, but other materials have been used, including concrete, glass, metal, vegetable solids, and wood. The containers should exclude light to prevent algae and fungal growth in the nutrient solution.
Static solution culture
![](https://upload.wikimedia.org/wikipedia/commons/thumb/7/7f/CDC_South_Aquaponics_Raft_Tank_1_2010-07-17.jpg/300px-CDC_South_Aquaponics_Raft_Tank_1_2010-07-17.jpg)
In static solution culture, plants are grown in containers of nutrient solution, such as glass Mason jars (typically, in-home applications), pots, buckets, tubs, or tanks. The solution is usually gently aerated but may be un-aerated.[12] If un-aerated, the solution level is kept low enough that enough roots are above the solution so they get adequate oxygen. A hole is cut (or drilled) in the top of the reservoir for each plant; if it is a jar or tub, it may be its lid, but otherwise, cardboard, foil, paper, wood or metal may be put on top. A single reservoir can be dedicated to a single plant, or to various plants. Reservoir size can be increased as plant size increases. A home-made system can be constructed from food containers or glass canning jars with aeration provided by an aquarium pump, aquarium airline tubing, aquarium valves or even a biofilm of green algae on the glass, through photosynthesis. Clear containers can also be covered with aluminium foil, butcher paper, black plastic, or other material to eliminate the effects of negative phototropism. The nutrient solution is changed either on a schedule, such as once per week, or when the concentration drops below a certain level as determined with an electrical conductivity meter. Whenever the solution is depleted below a certain level, either water or fresh nutrient solution is added. A Mariotte's bottle, or a float valve, can be used to automatically maintain the solution level. In raft solution culture, plants are placed in a sheet of buoyant plastic that is floated on the surface of the nutrient solution. That way, the solution level never drops below the roots.[39]
Continuous-flow solution culture
In continuous-flow solution culture, the nutrient solution constantly flows past the roots. It is much easier to automate than the static solution culture because sampling and adjustments to the temperature, pH, and nutrient concentrations can be made in a large storage tank that has potential to serve thousands of plants. A popular variation is the nutrient film technique or NFT, whereby a very shallow stream of water containing all the dissolved nutrients required for plant growth is recirculated in a thin layer past a bare root mat of plants in a watertight channel, with an upper surface exposed to air. As a consequence, an abundant supply of oxygen is provided to the roots of the plants. A properly designed NFT system is based on using the right channel slope, the right flow rate, and the right channel length. The main advantage of the NFT system over other forms of hydroponics is that the plant roots are exposed to adequate supplies of water, oxygen, and nutrients. In all other forms of production, there is a conflict between the supply of these requirements, since excessive or deficient amounts of one results in an imbalance of one or both of the others. NFT, because of its design, provides a system where all three requirements for healthy plant growth can be met at the same time, provided that the simple concept of NFT is always remembered and practised. The result of these advantages is that higher yields of high-quality produce are obtained over an extended period of cropping. A downside of NFT is that it has very little buffering against interruptions in the flow (e.g., power outages). But, overall, it is probably one of the more productive techniques.[40]
The same design characteristics apply to all conventional NFT systems. While slopes along channels of 1:100 have been recommended, in practice it is difficult to build a base for channels that is sufficiently true to enable nutrient films to flow without ponding in locally depressed areas. As a consequence, it is recommended that slopes of 1:30 to 1:40 are used.[41] This allows for minor irregularities in the surface, but, even with these slopes, ponding and water logging may occur. The slope may be provided by the floor, benches or racks may hold the channels and provide the required slope. Both methods are used and depend on local requirements, often determined by the site and crop requirements.
As a general guide, flow rates for each gully should be one liter per minute.[vague][42] At planting, rates may be half this and the upper limit of 2 L/min appears about the maximum. Flow rates beyond these extremes are often associated with nutritional problems. Depressed growth rates of many crops have been observed when channels exceed 12 meters in length. On rapidly growing crops, tests have indicated that, while oxygen levels remain adequate, nitrogen may be depleted over the length of the gully. As a consequence, channel length should not exceed 10–15 meters. In situations where this is not possible, the reductions in growth can be eliminated by placing another nutrient feed halfway along the gully and halving the flow rates through each outlet.[43][5]
Aeroponics
Aeroponics is a system wherein roots are continuously or discontinuously kept in an environment saturated with fine drops (a mist or aerosol) of nutrient solution. The method requires no substrate and entails growing plants with their roots suspended in a deep air or growth chamber with the roots periodically wetted with a fine mist of atomized nutrients. Excellent aeration is the main advantage of aeroponics.
![](https://upload.wikimedia.org/wikipedia/commons/thumb/9/93/Systeme_AEROPONIC_573px.jpg/450px-Systeme_AEROPONIC_573px.jpg)
Aeroponic techniques have proven to be commercially successful for propagation, seed germination, seed potato production, tomato production, leaf crops, and micro-greens.[44] Since inventor Richard Stoner commercialized aeroponic technology in 1983, aeroponics has been implemented as an alternative to water intensive hydroponic systems worldwide.[45] The limitation of hydroponics is the fact that 1 kilogram (2.2 lb) of water can only hold 8 milligrams (0.12 gr) of air, no matter whether aerators are utilized or not.
Another distinct advantage of aeroponics over hydroponics is that any species of plants can be grown in a true aeroponic system because the microenvironment of an aeroponic can be finely controlled. The limitation of hydroponics is that certain species of plants can only survive for so long in water before they become waterlogged. The advantage of aeroponics is that suspended aeroponic plants receive 100% of the available oxygen and carbon dioxide to the roots zone, stems, and leaves,[46] thus accelerating biomass growth and reducing rooting times. NASA research has shown that aeroponically grown plants have an 80% increase in dry weight biomass (essential minerals) compared to hydroponically grown plants. Aeroponics used 65% less water than hydroponics. NASA also concluded that aeroponically grown plants require ¼ the nutrient input compared to hydroponics.[47][48] Unlike hydroponically grown plants, aeroponically grown plants will not suffer transplant shock when transplanted to soil, and offers growers the ability to reduce the spread of disease and pathogens. Aeroponics is also widely used in laboratory studies of plant physiology and plant pathology. Aeroponic techniques have been given special attention from NASA since a mist is easier to handle than a liquid in a zero-gravity environment.[47][5]
Fogponics
Fogponics is a derivation of aeroponics wherein the nutrient solution is aerosolized by a diaphragm vibrating at ultrasonic frequencies. Solution droplets produced by this method tend to be 5–10 µm in diameter, smaller than those produced by forcing a nutrient solution through pressurized nozzles, as in aeroponics. The smaller size of the droplets allows them to diffuse through the air more easily, and deliver nutrients to the roots without limiting their access to oxygen.[49][50]
Passive sub-irrigation
Passive sub-irrigation, also known as passive hydroponics, semi-hydroponics, or hydroculture,[51] is a method wherein plants are grown in an inert porous medium that moves water and fertilizer to the roots by capillary action from a separate reservoir as necessary, reducing labor and providing a constant supply of water to the roots. In the simplest method, the pot sits in a shallow solution of fertilizer and water or on a capillary mat saturated with nutrient solution. The various hydroponic media available, such as expanded clay and coconut husk, contain more air space than more traditional potting mixes, delivering increased oxygen to the roots, which is important in epiphytic plants such as orchids and bromeliads, whose roots are exposed to the air in nature. Additional advantages of passive hydroponics are the reduction of root rot and the additional ambient humidity provided through evaporations.
Hydroculture compared to traditional farming in terms of crops yield per area in a controlled environment was roughly 10 times more efficient than traditional farming, uses 13 times less water in one crop cycle than traditional farming, but on average uses 100 times more kilojoules per kilogram of energy than traditional farming.[52]
Ebb and flow (flood and drain) sub-irrigation
In its simplest form, there is a tray above a reservoir of nutrient solution. Either the tray is filled with growing medium (clay granules being the most common) and then plant directly or place the pot over medium, stand in the tray. At regular intervals, a simple timer causes a pump to fill the upper tray with nutrient solution, after which the solution drains back down into the reservoir. This keeps the medium regularly flushed with nutrients and air. Once the upper tray fills past the drain stop, it begins recirculating the water until the timer turns the pump off, and the water in the upper tray drains back into the reservoirs.[53]
Run-to-waste
In a run-to-waste system, nutrient and water solution is periodically applied to the medium surface. The method was invented in Bengal in 1946; for this reason it is sometimes referred to as "The Bengal System".[54]
![](https://upload.wikimedia.org/wikipedia/commons/thumb/5/55/Bengal_System.png/300px-Bengal_System.png)
This method can be set up in various configurations. In its simplest form, a nutrient-and-water solution is manually applied one or more times per day to a container of inert growing media, such as rockwool, perlite, vermiculite, coco fibre, or sand. In a slightly more complex system, it is automated with a delivery pump, a timer and irrigation tubing to deliver nutrient solution with a delivery frequency that is governed by the key parameters of plant size, plant growing stage, climate, substrate, and substrate conductivity, pH, and water content.
In a commercial setting, watering frequency is multi-factorial and governed by computers or PLCs.
Commercial hydroponics production of large plants like tomatoes, cucumber, and peppers uses one form or another of run-to-waste hydroponics.
In environmentally responsible uses, the nutrient-rich waste is collected and processed through an on-site filtration system to be used many times, making the system very productive.[55]
Deep water culture
The hydroponic method of plant production by means of suspending the plant roots in a solution of nutrient-rich, oxygenated water. Traditional methods favor the use of plastic buckets and large containers with the plant contained in a net pot suspended from the centre of the lid and the roots suspended in the nutrient solution. The solution is oxygen saturated by an air pump combined with porous stones. With this method, the plants grow much faster because of the high amount of oxygen that the roots receive.[56] The Kratky Method is similar to deep water culture, but uses a non-circulating water reservoir.
Top-fed deep water culture
Top-fed deep water culture is a technique involving delivering highly oxygenated nutrient solution direct to the root zone of plants. While deep water culture involves the plant roots hanging down into a reservoir of nutrient solution, in top-fed deep water culture the solution is pumped from the reservoir up to the roots (top feeding). The water is released over the plant's roots and then runs back into the reservoir below in a constantly recirculating system. As with deep water culture, there is an airstone in the reservoir that pumps air into the water via a hose from outside the reservoir. The airstone helps add oxygen to the water. Both the airstone and the water pump run 24 hours a day.
The biggest advantage of top-fed deep water culture over standard deep water culture is increased growth during the first few weeks.[citation needed] With deep water culture, there is a time when the roots have not reached the water yet. With top-fed deep water culture, the roots get easy access to water from the beginning and will grow to the reservoir below much more quickly than with a deep water culture system. Once the roots have reached the reservoir below, there is not a huge advantage with top-fed deep water culture over standard deep water culture. However, due to the quicker growth in the beginning, grow time can be reduced by a few weeks.[citation needed]
Rotary
A rotary hydroponic garden is a style of commercial hydroponics created within a circular frame which rotates continuously during the entire growth cycle of whatever plant is being grown.
While system specifics vary, systems typically rotate once per hour, giving a plant 24 full turns within the circle each 24-hour period. Within the center of each rotary hydroponic garden can be a high intensity grow light, designed to simulate sunlight, often with the assistance of a mechanized timer.
Each day, as the plants rotate, they are periodically watered with a hydroponic growth solution to provide all nutrients necessary for robust growth. Due to the plants continuous fight against gravity, plants typically mature much more quickly than when grown in soil or other traditional hydroponic growing systems.[57] Because rotary hydroponic systems have a small size, they allow for more plant material to be grown per area of floor space than other traditional hydroponic systems.[58]
Rotary hydroponic systems should be avoided in most circumstances, mainly because of their experimental nature and their high costs for finding, buying, operating, and maintaining them.[59]
Substrates (growing support materials)
One of the most obvious decisions hydroponic farmers have to make is which medium they should use. Different media are appropriate for different growing techniques.
Rock wool
Rock wool (mineral wool) is the most widely used medium in hydroponics. Rock wool is an inert substrate suitable for both run-to-waste and recirculating systems. Rock wool is made from molten rock, basalt or 'slag' that is spun into bundles of single filament fibres, and bonded into a medium capable of capillary action, and is, in effect, protected from most common microbiological degradation. Rock wool is typically used only for the seedling stage, or with newly cut clones, but can remain with the plant base for its lifetime. Rock wool has many advantages and some disadvantages. The latter being the possible skin irritancy (mechanical) whilst handling (1:1000).[citation needed] Flushing with cold water usually brings relief. Advantages include its proven efficiency and effectiveness as a commercial hydroponic substrate. Most of the rock wool sold to date is a non-hazardous, non-carcinogenic material, falling under Note Q of the European Union Classification Packaging and Labeling Regulation (CLP).[citation needed]
Mineral wool products can be engineered to hold large quantities of water and air that aid root growth and nutrient uptake in hydroponics; their fibrous nature also provides a good mechanical structure to hold the plant stable. The naturally high pH of mineral wool makes them initially unsuitable to plant growth and requires "conditioning" to produce a wool with an appropriate, stable pH.[60]
Expanded clay aggregate
Baked clay pellets are suitable for hydroponic systems in which all nutrients are carefully controlled in water solution. The clay pellets are inert, pH-neutral, and do not contain any nutrient value.
The clay is formed into round pellets and fired in rotary kilns at 1,200 °C (2,190 °F). This causes the clay to expand, like popcorn, and become porous. It is light in weight, and does not compact over time. The shape of an individual pellet can be irregular or uniform depending on brand and manufacturing process. The manufacturers consider expanded clay to be an ecologically sustainable and re-usable growing medium because of its ability to be cleaned and sterilized, typically by washing in solutions of white vinegar, chlorine bleach, or hydrogen peroxide (H
2O
2), and rinsing completely.
Another view is that clay pebbles are best not re-used even when they are cleaned, due to root growth that may enter the medium. Breaking open a clay pebble after a crop has been shown to reveal this growth.
Growstones
Growstones, made from glass waste, have both more air and water retention space than perlite and peat. This aggregate holds more water than parboiled rice hulls.[61] Growstones by volume consist of 0.5 to 5% calcium carbonate[62] – for a standard 5.1 kg bag of Growstones that corresponds to 25.8 to 258 grams of calcium carbonate. The remainder is soda-lime glass.[62]
Coconut Coir
Regardless of hydroponic demand, coconut coir is a natural byproduct derived from coconut processes. The outer husk of a coconut consists of fibers which are commonly used to make a myriad of items ranging from floor mats to brushes. After the long fibers are used for those applications, the dust and short fibers are merged to create coir. Coconuts absorb high levels of nutrients throughout their life cycle, so the coir must undergo a maturation process before it becomes a viable growth medium.[63] This process removes salt, tannins and phenolic compounds through substantial water washing. Contaminated water is a byproduct of this process, as three hundred to six hundred liters of water per one cubic meter of coir is needed.[64] Additionally, this maturation can take up to six months and one study concluded the working conditions during the maturation process are dangerous and would be illegal in North America and Europe.[65] Despite requiring attention, posing health risks and environmental impacts, coconut coir has impressive material properties. When exposed to water, the brown, dry, chunky and fibrous material expands nearly three or four times its original size. This characteristic combined with coconut coir's water retention capacity and resistance to pests and diseases make it an effective growth medium. Used as an alternative to rock wool, coconut coir, also known as coir peat, offers optimized growing conditions.[66]
Rice husks
Parboiled rice husks (PBH) are an agricultural byproduct that would otherwise have little use. They decay over time, and allow drainage,[67] and even retain less water than growstones.[61] A study showed that rice husks did not affect the effects of plant growth regulators.[67][non-primary source needed]
Perlite
Perlite is a volcanic rock that has been superheated into very lightweight expanded glass pebbles. It is used loose or in plastic sleeves immersed in the water. It is also used in potting soil mixes to decrease soil density. It does contain a high amount of fluorine which could be harmful to some plants.[68] Perlite has similar properties and uses to vermiculite but, in general, holds more air and less water and is buoyant.
Vermiculite
Like perlite, vermiculite is a mineral that has been superheated until it has expanded into light pebbles. Vermiculite holds more water than perlite and has a natural "wicking" property that can draw water and nutrients in a passive hydroponic system. If too much water and not enough air surrounds the plants roots, it is possible to gradually lower the medium's water-retention capability by mixing in increasing quantities of perlite.
Pumice
Like perlite, pumice is a lightweight, mined volcanic rock that finds application in hydroponics.
Sand
Sand is cheap and easily available. However, it is heavy, does not hold water very well, and it must be sterilized between uses.[69]
Gravel
The same type that is used in aquariums, though any small gravel can be used, provided it is washed first. Indeed, plants growing in a typical traditional gravel filter bed, with water circulated using electric powerhead pumps, are in effect being grown using gravel hydroponics, also termed "nutriculture". Gravel is inexpensive, easy to keep clean, drains well and will not become waterlogged. However, it is also heavy, and, if the system does not provide continuous water, the plant roots may dry out.
Wood fiber
Wood fibre, produced from steam friction of wood, is an efficient organic substrate for hydroponics. It has the advantage that it keeps its structure for a very long time. Wood wool (i.e. wood slivers) have been used since the earliest days of the hydroponics research.[28] However, more recent research suggests that wood fibre may have detrimental effects on "plant growth regulators".[67][non-primary source needed]
Sheep wool
Wool from shearing sheep is a little-used yet promising renewable growing medium. In a study comparing wool with peat slabs, coconut fibre slabs, perlite and rockwool slabs to grow cucumber plants, sheep wool had a greater air capacity of 70%, which decreased with use to a comparable 43%, and water capacity that increased from 23% to 44% with use.[70] Using sheep wool resulted in the greatest yield out of the tested substrates, while application of a biostimulator consisting of humic acid, lactic acid and Bacillus subtilis improved yields in all substrates.[70]
Brick shards
Brick shards have similar properties to gravel. They have the added disadvantages of possibly altering the pH and requiring extra cleaning before reuse.[71]
Polystyrene packing peanuts
Polystyrene packing peanuts are inexpensive, readily available, and have excellent drainage. However, they can be too lightweight for some uses. They are used mainly in closed-tube systems. Note that non-biodegradable polystyrene peanuts must be used; biodegradable packing peanuts will decompose into a sludge. Plants may absorb styrene and pass it to their consumers; this is a possible health risk.[71]
Nutrient solutions
Inorganic hydroponic solutions
The formulation of hydroponic solutions is an application of plant nutrition, with nutrient deficiency symptoms mirroring those found in traditional soil based agriculture. However, the underlying chemistry of hydroponic solutions can differ from soil chemistry in many significant ways. Important differences include:
- Unlike soil, hydroponic nutrient solutions do not have cation-exchange capacity (CEC) from clay particles or organic matter. The absence of CEC and soil pores means the pH, oxygen saturation, and nutrient concentrations can change much more rapidly in hydroponic setups than is possible in soil.
- Selective absorption of nutrients by plants often imbalances the amount of counterions in solution.[28][72][73] This imbalance can rapidly affect solution pH and the ability of plants to absorb nutrients of similar ionic charge (see article membrane potential). For instance, nitrate anions are often consumed rapidly by plants to form proteins, leaving an excess of cations in solution.[28] This cation imbalance can lead to deficiency symptoms in other cation based nutrients (e.g. Mg2+) even when an ideal quantity of those nutrients are dissolved in the solution.[72][73]
- Depending on the pH or on the presence of water contaminants, nutrients such as iron can precipitate from the solution and become unavailable to plants. Routine adjustments to pH, buffering the solution, or the use of chelating agents is often necessary.[74]
- Unlike soil types, which can vary greatly in their composition, hydroponic solutions are often standardized and require routine maintenance for plant cultivation.[75] Under controlled conditions hydroponic solutions are periodically pH adjusted to near neutral (pH ≈ 6.0) and are aerated with oxygen. Also, water levels must be refilled to account for transpiration losses and nutrient solutions require re-fortification to correct the nutrient imbalances that occur as plants grow and deplete nutrient reserves. Sometimes the regular measurement of nitrate ions is used as a key parameter to estimate the remaining proportions and concentrations of other essential nutrient ions in a balanced solution.[76]
- Well-known examples of standardized, balanced nutrient solutions are the Hoagland solution, the Long Ashton nutrient solution, or the Knop solution.
As in conventional agriculture, nutrients should be adjusted to satisfy Liebig's law of the minimum for each specific plant variety.[72] Nevertheless, generally acceptable concentrations for nutrient solutions exist, with minimum and maximum concentration ranges for most plants being somewhat similar.[77] Most nutrient solutions are mixed to have concentrations between 1,000 and 2,500 ppm.[28] Acceptable concentrations for the individual nutrient ions, which comprise that total ppm figure, are summarized in the following table. For essential nutrients, concentrations below these ranges often lead to nutrient deficiencies while exceeding these ranges can lead to nutrient toxicity. Optimum nutrition concentrations for plant varieties are found empirically by experience or by plant tissue tests.[72]
Element | Role | Ionic form(s) | Low range (ppm) | High range (ppm) | Common Sources | Comment |
---|---|---|---|---|---|---|
Nitrogen | Essential macronutrient | NO− 3 or NH+ 4 |
100[73] | 1000[72] | KNO3, NH4NO3, Ca(NO3)2, HNO3, (NH4)2SO4, and (NH4)2HPO4 | NH+ 4 interferes with Ca2+ uptake and can be toxic to plants if used as a major nitrogen source. A 3:1 ratio of NO− 3-N to NH+ 4-N (wt%) is sometimes recommended to balance pH during nitrogen absorption.[73] Plants respond differently depending on the form of nitrogen, e.g., ammonium has a positive charge, and thus, the plant expels one proton (H+ ) for every NH+ 4 taken up resulting in a reduction in rhizosphere pH. When supplied with NO− 3, the opposite can occur where the plant releases bicarbonate (HCO− 3) which increases rhizosphere pH. These changes in pH can influence the availability of other plant nutrients (e.g., Zn, Ca, Mg).[78] |
Potassium | Essential macronutrient | K+ | 100[72] | 400[72] | KNO3, K2SO4, KCl, KOH, K2CO3, K2HPO4, and K2SiO3 | High concentrations interfere with the function of Fe, Mn, and Zn. Zinc deficiencies often are the most apparent.[73] |
Phosphorus | Essential macronutrient | PO3− 4 |
30[73] | 100[72] | K2HPO4, KH2PO4, NH4H2PO4, H3PO4, and Ca(H2PO4)2 | Excess NO− 3 tends to inhibit PO3− 4 absorption. The ratio of iron to PO3− 4 can affect co-precipitation reactions.[72] |
Calcium | Essential macronutrient | Ca2+ | 200[73] | 500[72] | Ca(NO3)2, Ca(H2PO4)2, CaSO4, CaCl2 | Excess Ca2+ inhibits Mg2+ uptake.[73] |
Magnesium | Essential macronutrient | Mg2+ | 50[72] | 100[72] | MgSO4 and MgCl2 | Should not exceed Ca2+ concentration due to competitive uptake.[73] |
Sulfur | Essential macronutrient | SO2− 4 |
50[73] | 1000[72] | MgSO4, K2SO4, CaSO4, H2SO4, (NH4)2SO4, ZnSO4, CuSO4, FeSO4, and MnSO4 | Unlike most nutrients, plants can tolerate a high concentration of the SO2− 4, selectively absorbing the nutrient as needed.[28][72][73] Undesirable counterion effects still apply however. |
Iron | Essential micronutrient | Fe3+ and Fe2+ | 2[73] | 5[72] | FeDTPA, FeEDTA, iron citrate, iron tartrate, FeCl3, Ferric EDTA, and FeSO4 | pH values above 6.5 greatly decreases iron solubility. Chelating agents (e.g. DTPA, citric acid, or EDTA) are often added to increase iron solubility over a greater pH range.[73] |
Zinc | Essential micronutrient | Zn2+ | 0.05[73] | 1[72] | ZnSO4 | Excess zinc is highly toxic to plants but is essential for plants at low concentrations. The zinc content of commercially available plant-based food ranges from 3 to 10 µg/g fresh weight.[79] |
Copper | Essential micronutrient | Cu2+ | 0.01[73] | 1[72] | CuSO4 | Plant sensitivity to copper is highly variable. 0.1 ppm can be toxic to some plants[73] while a concentration up to 0.5 ppm for many plants is often considered ideal.[72] |
Manganese | Essential micronutrient | Mn2+ | 0.5[72][73] | 1[72] | MnSO4 and MnCl2 | Uptake is enhanced by high PO3− 4 concentrations.[73] |
Boron | Essential micronutrient | B(OH)− 4 |
0.3[73] | 10[72] | H3BO3, and Na2B4O7 | An essential nutrient, however, some plants are highly sensitive to boron (e.g. toxic effects are apparent in citrus trees at 0.5 ppm).[72] |
Molybdenum | Essential micronutrient | MoO− 4 |
0.001[72] | 0.05[73] | (NH4)6Mo7O24 and Na2MoO4 | A component of the enzyme nitrate reductase and required by rhizobia for nitrogen fixation.[73] |
Chlorine | Essential micronutrient | Cl− | 0.65[80] | 9[81] | KCl, CaCl2, MgCl2, and NaCl | Can interfere with NO− 3 uptake in some plants but can be beneficial in some plants (e.g. in asparagus at 5 ppm). Absent in conifers, ferns, and most bryophytes.[72] Chloride is one of the 16 elements essential for plant growth. Because it is supposedly needed in small quantities for healthy growth of plants (< 50–100 μM in the nutrient media), chloride is classified as a micronutrient.[82] |
Aluminum | Variable micronutrient | Al3+ | 0 | 10[72] | Al2(SO4)3 | Essential for some plants (e.g. peas, maize, sunflowers, and cereals). Can be toxic to some plants below 10 ppm.[72] Sometimes used to produce flower pigments (e.g. by Hydrangeas). |
Silicon | Variable micronutrient | SiO2− 3 |
0 | 140[73] | K2SiO3, Na2SiO3, and H2SiO3 | Present in most plants, abundant in cereal crops, grasses, and tree bark. Evidence that SiO2− 3 improves plant disease resistance exists.[72] |
Titanium | Variable micronutrient | Ti3+ | 0 | 5[72] | H4TiO4 | Might be essential but trace Ti3+ is so ubiquitous that its addition is rarely warranted.[73] At 5 ppm favorable growth effects in some crops are notable (e.g. pineapple and peas).[72] |
Cobalt | Variable micronutrient | Co2+ | 0 | 0.1[72] | CoSO4 | Required by rhizobia, important for legume root nodulation.[73] Some algae require cobalt for the synthesis of vitamin B12.[83] |
Nickel | Variable micronutrient | Ni2+ | 0.057[73] | 1.5[72] | NiSO4 and NiCO3 | Essential to many plants (e.g. legumes and some grain crops).[73] Also used in the enzyme urease. |
Sodium | Non-essential micronutrient | Na+ | 0 | 31[84] | Na2SiO3, Na2SO4, NaCl, NaHCO3, and NaOH | Na+ can partially replace K+ in some plant functions but K+ is still an essential nutrient.[72] |
Vanadium | Non-essential micronutrient | VO2+ | 0 | Trace, undetermined | VOSO4 | Beneficial for rhizobial N2 fixation.[73] |
Lithium | Non-essential micronutrient | Li+ | 0 | Undetermined | Li2SO4, LiCl, and LiOH | Li+ can increase the chlorophyll content of some plants (e.g. potato and pepper plants).[73] |
Organic hydroponic solutions
Organic fertilizers can be used to supplement or entirely replace the inorganic compounds used in conventional hydroponic solutions.[72][73] However, using organic fertilizers introduces a number of challenges that are not easily resolved. Examples include:
- organic fertilizers are highly variable in their nutritional compositions in terms of minerals and different chemical species. Even similar materials can differ significantly based on their source (e.g. the quality of manure varies based on an animal's diet).
- organic fertilizers are often sourced from animal byproducts, making disease transmission a serious concern for plants grown for human consumption or animal forage.
- organic fertilizers are often particulate and can clog substrates or other growing equipment. Sieving or milling the organic materials to fine dusts is often necessary.
- biochemical degradation and conversion processes of organic materials can make mineral ingredients available to plants.
- some organic materials (i.e. particularly manures and offal) can further degrade to emit foul odors under anaerobic conditions.
- many organic molecules (i.e. sugars) demand additional oxygen during aerobic degradation, which is essential for cellular respiration in the plant roots.
- organic compounds (i.e. sugars, vitamins, a.o.) are not necessary for normal plant nutrition.[85]
Nevertheless, if precautions are taken, organic fertilizers can be used successfully in hydroponics.[72][73]
Organically sourced macronutrients
Examples of suitable materials, with their average nutritional contents tabulated in terms of percent dried mass, are listed in the following table.[72]
Organic material | N | P2O5 | K2O | CaO | MgO | SO2 | Comment |
---|---|---|---|---|---|---|---|
Bloodmeal | 13.0% | 2.0% | 1.0% | 0.5% | – | – | |
Bone ashes | – | 35.0% | – | 46.0% | 1.0% | 0.5% | |
Bonemeal | 4.0% | 22.5% | – | 33.0% | 0.5% | 0.5% | |
Hoof / Horn meal | 14.0% | 1.0% | – | 2.5% | – | 2.0% | |
Fishmeal | 9.5% | 7.0% | – | 0.5% | – | – | |
Wool waste | 3.5% | 0.5% | 2.0% | 0.5% | – | – | |
Wood ashes | – | 2.0% | 5.0% | 33.0% | 3.5% | 1.0% | |
Cottonseed ashes | – | 5.5% | 27.0% | 9.5% | 5.0% | 2.5% | |
Cottonseed meal | 7.0% | 3.0% | 2.0% | 0.5% | 0.5% | – | |
Dried locust or grasshopper | 10.0% | 1.5% | 0.5% | 0.5% | – | – | |
Leather waste | 5.5% to 22% | – | – | – | – | – | Milled to a fine dust.[73] |
Kelp meal, liquid seaweed | 1% | – | 12% | – | – | – | Commercial products available. |
Poultry manure | 2% to 5% | 2.5% to 3% | 1.3% to 3% | 4.0% | 1.0% | 2.0% | A liquid compost which is sieved to remove solids and checked for pathogens.[72] |
Sheep manure | 2.0% | 1.5% | 3.0% | 4.0% | 2.0% | 1.5% | Same as poultry manure. |
Goat manure | 1.5% | 1.5% | 3.0% | 2.0% | – | – | Same as poultry manure. |
Horse manure | 3% to 6% | 1.5% | 2% to 5% | 1.5% | 1.0% | 0.5% | Same as poultry manure. |
Cow manure | 2.0% | 1.5% | 2.0% | 4.0% | 1.1% | 0.5% | Same as poultry manure. |
Bat guano | 8.0% | 40% | 29% | Trace | Trace | Trace | High in micronutrients.[73] Commercially available. |
Bird guano | 13% | 8% | 20% | Trace | Trace | Trace | High in micronutrients. Commercially available. |
Organically sourced micronutrients
Micronutrients can be sourced from organic fertilizers as well. For example, composted pine bark is high in manganese and is sometimes used to fulfill that mineral requirement in hydroponic solutions.[73] To satisfy requirements for National Organic Programs, pulverized, unrefined minerals (e.g. Gypsum, Calcite, and glauconite) can also be added to satisfy a plant's nutritional needs.
Additives
Compounds can be added in both organic and conventional hydroponic systems to improve nutrition acquisition and uptake by the plant. Chelating agents and humic acid have been shown to increase nutrient uptake.[86][73] Additionally, plant growth promoting rhizobacteria (PGPR), which are regularly utilized in field and greenhouse agriculture, have been shown to benefit hydroponic plant growth development and nutrient acquisition.[87] Some PGPR are known to increase nitrogen fixation. While nitrogen is generally abundant in hydroponic systems with properly maintained fertilizer regimens, Azospirillum and Azotobacter genera can help maintain mobilized forms of nitrogen in systems with higher microbial growth in the rhizosphere.[88] Traditional fertilizer methods often lead to high accumulated concentrations of nitrate within plant tissue at harvest. Rhodopseudo-monas palustris has been shown to increase nitrogen use efficiency, increase yield, and decrease nitrate concentration by 88% at harvest compared to traditional hydroponic fertilizer methods in leafy greens.[89] Many Bacillus spp., Pseudomonas spp. and Streptomyces spp. convert forms of phosphorus in the soil that are unavailable to the plant into soluble anions by decreasing soil pH, releasing phosphorus bound in chelated form that is available in a wider pH range, and mineralizing organic phosphorus.[88]
Some studies have found that Bacillus inoculants allow hydroponic leaf lettuce to overcome high salt stress that would otherwise reduce growth.[90] This can be especially beneficial in regions with high electrical conductivity or salt content in their water source. This could potentially avoid costly reverse osmosis filtration systems while maintaining high crop yield.
Tools
Common equipment
Managing nutrient concentrations, oxygen saturation, and pH values within acceptable ranges is essential for successful hydroponic horticulture. Common tools used to manage hydroponic solutions include:
- Electrical conductivity meters, a tool which estimates nutrient ppm by measuring how well a solution transmits an electric current.
- pH meter, a tool that uses an electric current to determine the concentration of hydrogen ions in solution.
- Oxygen electrode, an electrochemical sensor for determining the oxygen concentration in solution.
- Litmus paper, disposable pH indicator strips that determine hydrogen ion concentrations by color changing chemical reaction.
- Graduated cylinders or measuring spoons to measure out premixed, commercial hydroponic solutions.
Equipment
Chemical equipment can also be used to perform accurate chemical analyses of nutrient solutions. Examples include:[72]
- Balances for accurately measuring materials.
- Laboratory glassware, such as burettes and pipettes, for performing titrations.
- Colorimeters for solution tests which apply the Beer–Lambert law.
- Spectrophotometer to measure the concentrations of the key parameter nitrate and other nutrients, such as phosphate, sulfate or iron.
Using chemical equipment for hydroponic solutions can be beneficial to growers of any background because nutrient solutions are often reusable.[91] Because nutrient solutions are virtually never completely depleted, and should never be due to the unacceptably low osmotic pressure that would result, re-fortification of old solutions with new nutrients can save growers money and can control point source pollution, a common source for the eutrophication of nearby lakes and streams.[91]
Software
Although pre-mixed concentrated nutrient solutions are generally purchased from commercial nutrient manufacturers by hydroponic hobbyists and small commercial growers, several tools exist to help anyone prepare their own solutions without extensive knowledge about chemistry. The free and open source tools HydroBuddy[92] and HydroCal[93] have been created by professional chemists to help any hydroponics grower prepare their own nutrient solutions. The first program is available for Windows, Mac and Linux while the second one can be used through a simple JavaScript interface. Both programs allow for basic nutrient solution preparation although HydroBuddy provides added functionality to use and save custom substances, save formulations and predict electrical conductivity values.
Mixing solutions
Often mixing hydroponic solutions using individual salts is impractical for hobbyists or small-scale commercial growers because commercial products are available at reasonable prices. However, even when buying commercial products, multi-component fertilizers are popular. Often these products are bought as three part formulas which emphasize certain nutritional roles. For example, solutions for vegetative growth (i.e. high in nitrogen), flowering (i.e. high in potassium and phosphorus), and micronutrient solutions (i.e. with trace minerals) are popular. The timing and application of these multi-part fertilizers should coincide with a plant's growth stage. For example, at the end of an annual plant's life cycle, a plant should be restricted from high nitrogen fertilizers. In most plants, nitrogen restriction inhibits vegetative growth and helps induce flowering.[73]
Additional improvements
Growrooms
With pest problems reduced and nutrients constantly fed to the roots, productivity in hydroponics is high; however, growers can further increase yield by manipulating a plant's environment by constructing sophisticated growrooms.[94]
CO2 enrichment
To increase yield further, some sealed greenhouses inject CO2 into their environment to help improve growth and plant fertility.
See also
References
- ^ a b Gericke, William F. (1937). "Hydroponics - crop production in liquid culture media". Science. 85 (2198): 177–178. Bibcode:1937Sci....85..177G. doi:10.1126/science.85.2198.177. PMID 17732930.
- ^ Gericke, William F. (1945). "The meaning of hydroponics". Science. 101 (2615): 142–143. Bibcode:1945Sci...101..142G. doi:10.1126/science.101.2615.142. PMID 17800488.
- ^ Nye, P. H. (1981). "Changes of pH across the rhizosphere induced by roots". Plant and Soil. 61 (1–2): 7–26. doi:10.1007/BF02277359. S2CID 24813211.
- ^ Walker, T. S.; Bais, H. P.; Grotewold, E.; Vivanco, J. M. (2003). "Root exudation and rhizosphere biology". Plant Physiology. 132 (1): 44–51. doi:10.1104/pp.102.019661. PMC 1540314. PMID 12746510.
- ^ a b c Suryawanshi, Yogesh (2021). "Hydroponic Cultivation Approaches to Enhance the Contents of the Secondary Metabolites in Plants". Biotechnological Approaches to Enhance Plant Secondary Metabolites. CRC Press.: 71–88. doi:10.1201/9781003034957-5. ISBN 9781003034957. S2CID 239706318.
- ^ Horn, M.E.; Woodard, S.L.; Howard, J.A. (2004). "Plant molecular farming: systems and products". Plant Cell Reports. 22 (10): 711–720. doi:10.1007/s00299-004-0767-1.
{{cite journal}}
: CS1 maint: uses authors parameter (link) - ^ Jones, J. B. Jr. (2004). Hydroponics: A Practical Guide for the Soilless Grower (2nd ed.). Boca Raton, London, New York, Washington, D. C.: CRC Press. pp. 153–166. ISBN 9780849331671.
- ^ a b "The future of farming: hydroponics". PSCI. Retrieved Aug 25, 2022.
- ^ "A simplified hydroponic culture of Arabidopsis". Bio-101. Retrieved Mar 4, 2020.
- ^ "How much water is needed to produce food and how much do we waste?". The Guardian. Retrieved Aug 19, 2022.
- ^ Zhang, He; Asutosh, Ashish; Hu, Wei (2018-11-27). "Implementing Vertical Farming at University Scale to Promote Sustainable Communities: A Feasibility Analysis". Sustainability. 10 (12): 4429. doi:10.3390/su10124429. ISSN 2071-1050. The paper describes the authors statistical concept modeling in determining the potential advantages of developing a vertical farm at Huazhong University of Science and Technology. While the figures are conservative and project the farm's profitability in 10 to 20 years, it is based on metadata and not on direct observation.
- ^ a b Nagel, K.A.; Kastenholz, B.; Gilmer, F.; Schurr, U.; Walter, A. (2010). "Novel detection system for plant protein production of pharmaceuticals and impact on conformational diseases". Protein and Peptide Letters. 17 (6): 723–731. doi:10.2174/092986610791190282. PMID 20015023.
{{cite journal}}
: CS1 maint: uses authors parameter (link) - ^
Compare:
Gericke, William F. (1938). "Crop production without soil". Nature. 141 (3569): 536–540. Bibcode:1938Natur.141..536G. doi:10.1038/141536a0. S2CID 38739387.
It is, of course, not inconceivable that industry may develop and manufacture equipment at markedly greater economy than prevails at present, thereby increasing the number of crops that can be grown economically.
- ^ Stutte, G. W.; Newsham, G.; Morrow, R. M.; Wheeler, R. M. (2012). "Concept for Sustained Plant Production on ISS Using VEGGIE Capillary Mat Rooting System". 41st International Conference on Environmental Systems 17-21 July 2011, Portland, Oregon: 1–17. doi:10.2514/6.2011-5263. hdl:2060/20110011606. ISBN 978-1-60086-948-8. S2CID 13847293.
- ^ a b Douglas, J. S. (1975). Hydroponics (5th ed.). Bombay: Oxford UP. pp. 1–3.
- ^ Sachs, J. v.: Chemistry in its Applications to Agriculture and Physiology. Clarendon Press, Oxford (1887), pp. 836.
- ^ Breazeale, J. F. (1906). "The relation of sodium to potassium in soil and solution cultures". Journal of the American Chemical Society. 28 (8): 1013–1025. doi:10.1021/ja01974a008.
- ^ Hoagland, D.R.; Snyder, W.C. (1933). "Nutrition of strawberry plant under controlled conditions. (a) Effects of deficiencies of boron and certain other elements, (b) susceptibility to injury from sodium salts". Proceedings of the American Society for Horticultural Science. 30: 288–294.
- ^ "Dennis Robert Hoagland: 1884-1949" (PDF). Biographical Memoirs of the National Academy of Sciences. Retrieved 2 December 2020.
- ^ Gericke, William F. (1929). "Aquiculture - a means of crop production". American Journal of Botany. 16: 862–867.
- ^ Dunn, H. H. (October 1929). "Plant "Pills" Grow Bumper Crops". Popular Science Monthly: 29–30.
- ^ Thiyagarajan, G.; Umadevi, R.; Ramesh, K. (Jan 2007). "Hydroponics" (PDF). Science Tech Entrepreneur. Archived from the original (PDF) on December 29, 2009 – via Wayback Machine.
- ^ Turner, Bambi (Oct 20, 2008). "How Hydroponics Works". HowStuffWorks. InfoSpace Holdings LLC. Retrieved May 29, 2012.
- ^ "Biography of W.A. Setchell". The University and Jepson Herbaria, University of California. Archived from the original on October 15, 2015. Retrieved Nov 21, 2018.
- ^ Liddell, H. G.; Scott, R. "A Greek-English Lexicon". www.perseus.tufts.edu. Retrieved Nov 21, 2018.
- ^ "First hydroponics experiment video of William Frederick Gericke in 1930s". YouTube. June 25, 2021. Archived from the original on 2021-10-31.
- ^ "History of hydroponics". Garden Culture Magazine. Retrieved Aug 18, 2022.
- ^ a b c d e f g h Gericke, William F. (1940). The Complete Guide to Soilless Gardening (1st ed.). London: Putnam. pp. 9–10, 38 & 84. ISBN 9781163140499.
- ^ Hoagland, D. R; Arnon, D. I (1938). The water-culture method for growing plants without soil. Circular. Berkeley, CA: University of California, College of Agriculture, Agricultural Experiment Station.
- ^ Arnon, D. I.; Hoagland, D. R. (1940). "Crop production in artificial culture solutions and in soils with special reference to factors influencing yields and absorption of inorganic nutrients". Soil Science. 50 (1): 463–485.
- ^ "Various hydroponics systems". Hydroponic Urban Gardening Blog. Retrieved Feb 5, 2020.
- ^ Texier, W.: Hydroponics for Everybody - All about Home Horticulture. Mama Publishing, English Edition, Paris (2015), pp. 235.
- ^ Taylor, F. J. (Jul 1939). "Nice Clean Gardening". The Rotarian. 55 (1): 14–15. ISSN 0035-838X.
- ^ Sullivan, Walter. "Daniel Arnon, 84, Researcher And Expert on Photosynthesis", The New York Times, December 23, 1994. Accessed April 7, 2020
- ^ Cooper, A. J. (1979). The ABC of NFT: nutrient film technique: the world's first method of crop production without a solid rooting medium. London: Grower Books. ISBN 0901361224. OCLC 5809348.
- ^ Heiney, A. (Aug 27, 2004). "Farming for the Future". www.nasa.gov. Retrieved Nov 21, 2018.
- ^ Schaefer, Karen (2017-01-02). "Canadian greenhouse industry seeks methods to reduce pollution into Lake Erie". Marketplace.org. Marketplace.org. Retrieved 17 January 2017.
- ^ Wood, Laura (Dec 6, 2017). "Global Hydroponics Market Report 2017-2023: Market is expected to grow from $226.45 million in 2016 to reach $724.87 million by 2023 - Research and Markets". Business Wire. Berkshire Hathaway. Retrieved Apr 1, 2018.
- ^ Suryawanshi, Yogesh (2021). "Hydroponic Cultivation Approaches to Enhance the Contents of the Secondary Metabolites in Plants". Biotechnological Approaches to Enhance Plant Secondary Metabolites: 71–88. doi:10.1201/9781003034957-5. ISBN 9781003034957. S2CID 239706318.
- ^ "Nutrient Film Technique - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2022-10-19.
- ^ "Nutrient Film Technique". www.flairform.com. Archived from the original on 2018-04-16. Retrieved Nov 22, 2018.
- ^ "What are the fundamentals of setting up an NFT system?". Practical Hydroponics & Greenhouses. Casper Publications (148). Oct 2014. Archived from the original on 2017-09-04. Retrieved 2017-05-16 – via Wayback Machine.
- ^ "Dissolved Oxygen and Water | U.S. Geological Survey". www.usgs.gov. Retrieved 2022-10-19.
- ^ "Commercial Aeroponics: The Grow Anywhere Story". In Vitro Report. Research News. The Society for In Vitro Biology. 44 (2). 2008. Archived from the original on 2017-01-31. Retrieved 2018-11-22.
- ^ Stoner, R. J. (Sep 22, 1983). "Aeroponics Versus Bed and Hydroponic Propagation". Florists' Review. 173 (4477) – via AgriHouse.
- ^ Stoner, R. J. (1983). "Rooting in Air". Greenhouse Grower. 1 (11).
- ^ a b NASA (2006). "Progressive Plant Growing Has Business Blooming" (PDF). 2006 Spinoff. NASA Center for AeroSpace Information (CASI): 64–67.
- ^ Ritter, E.; Angulo, B.; Riga, P.; Herrán, C.; Relloso, J.; San Jose, M. (2001). "Comparison of hydroponic and aeroponic cultivation systems for the production of potato minitubers". Potato Research. 44 (2): 127–135. doi:10.1007/bf02410099. ISSN 0014-3065. S2CID 3003824.
{{cite journal}}
: CS1 maint: uses authors parameter (link) - ^ Elliott, S. (Dec 27, 2016). "Figuring Out Fogponics". Maximum Yield. Retrieved Mar 15, 2017.
- ^ "Smart Indoor fogponics farming system". : M Rakib Uddin and M F Suliaman 2021 IOP Conf. Ser.: Earth Environ. Sci 673012012.
- ^ "What is Hydroculture?". Greens Hydroponics. Archived from the original on November 23, 2018. Retrieved Nov 22, 2018.
- ^ Barbosa, G.; Gadelha, F.; Kublik, N.; Proctor, A.; Reichelm, L.; Weissinger, E.; Wohlleb, G.; Halden, R.; Barbosa, G. L. (2015). "Comparison of Land, Water, and Energy Requirements of Lettuce Grown Using Hydroponic vs. Conventional Agricultural Methods". Int. J. Environ. Res. Public Health. MDPI. 12 (6): 6879–6891. doi:10.3390/ijerph120606879. PMC 4483736. PMID 26086708.
{{cite journal}}
: CS1 maint: uses authors parameter (link) - ^ "Flood and Drain or Ebb and Flow". www.makehydroponics.com. Archived from the original on 2013-02-17. Retrieved 2013-05-17.
- ^ Douglas, James Sholto (1975). Hydroponics: The Bengal System (5th ed.). New Delhi: Oxford University Press. p. 10. ISBN 9780195605662.
- ^ "Frequently Asked Questions". Newagehydro.com. Retrieved 2011-09-20.
- ^ "Deep Water Culture". GroWell Hydroponics & Plant Lighting. Archived from the original on April 13, 2010.
- ^ Al-Kodmany, K. (2018). "The vertical farm: a review of developments and implications for the vertical city". Buildings. 8 (2): 1–24. doi:10.3390/buildings8020024.
{{cite journal}}
: CS1 maint: uses authors parameter (link) - ^ Sky Green (Jun 17, 2016). "Commercial Vertical Farming Initiatives" (PDF). MVO Netherland. Archived from the original (PDF) on May 9, 2018. Retrieved Nov 22, 2018.
- ^ Manos, D.-P.; Xydis, G. (2019). "Hydroponics: are we moving towards that direction only because of the environment? A discussion on forecasting and a systems review". Environmental Science and Pollution Research. 26 (13): 12662–12672. doi:10.1007/s11356-019-04933-5. PMID 30915697.
{{cite journal}}
: CS1 maint: uses authors parameter (link) - ^ Tom Alexander; Don Parker (1994). The Best of Growing Edge. New Moon Publishing, Inc. ISBN 978-0-944557-01-3.
- ^ a b "Growstones ideal alternative to perlite, parboiled rice hulls". (e) Science News. Dec 14, 2011. Archived from the original on July 19, 2018. Retrieved Nov 22, 2018.
- ^ a b "GrowStone Products MSDS" (PDF). Growstone, LLC. Dec 22, 2011. Archived from the original (PDF) on April 10, 2018. Retrieved Nov 22, 2018.
- ^ Namasivayam, C.; Sangeetha, D. (January 2008). "Application of coconut coir pith for the removal of sulfate and other anions from water". Desalination. 219 (1–3): 1–13. doi:10.1016/j.desal.2007.03.008.
- ^ [Pavlis, Robert. “Is Coir an Eco-Friendly Substitute for Peat Moss?” Garden Myths, 22 July 2017, www.gardenmyths.com/coir-ecofriendly-substitute-peat-moss/.].
- ^ [Panicker, Venugopal, et al. “Nasobronchial Allergy and Pulmonary Function Abnormalities Among Coir Workers of Alappuzha.” Associations of Physicians India, 4 Sept. 2010, www.japi.org/july_2010/Article_03.pdf.].
- ^ Barrett, G.E.; Alexander, P.D.; Robinson, J.S.; Bragg, N.C. (November 2016). "Achieving environmentally sustainable growing media for soilless plant cultivation systems – A review". Scientia Horticulturae. 212: 220–234. doi:10.1016/j.scienta.2016.09.030.
- ^ a b c Wallheimer, Brian (Oct 25, 2010). "Rice hulls a sustainable drainage option for greenhouse growers". Purdue University. Retrieved Aug 30, 2012.
- ^ Stallsmith, Audrey (2021-11-24). "Vermiculite vs Perlite: Which is Best for Your Potted Plants?". Bob Vila. Retrieved 2022-08-03.
- ^ "An Intro Into Sand Culture Hydroponics". The FVSU Greenhouse Project. Jun 13, 2014. Retrieved Nov 22, 2018.
- ^ a b Böhme, M.; Schevchenko, J.; Pinker, I.; Herfort, S. (Jan 2008). "Cucumber grown in sheepwool slabs treated with biostimulator compared to other organic and mineral substrates". Acta Horticulturae. 779 (779): 299–306. doi:10.17660/actahortic.2008.779.36. ISSN 0567-7572.
- ^ a b Parker, Rick (2009). Plant & Soil Science: Fundamentals & Applications. Cengage Learning. ISBN 978-1111780777. Retrieved 22 January 2019.
- ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah ai aj ak Sholto Douglas, James (1985). Advanced guide to hydroponics: (soiless cultivation). London: Pelham Books. pp. 169–187, 289–320, & 345–351. ISBN 9780720715712.
- ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah ai J. Benton, Jones (2004). Hydroponics: A Practical Guide for the Soilless Grower (2nd ed.). New York: Taylor & Francis. pp. 29–70 & 225–229. ISBN 9780849331671.
- ^ Lea-Cox, J. D.; Stutte, G. W.; Berry, W. L.; Wheeler, R. M. (1996). "Charge balance - a theoretical basis for modulating pH fluctuations in plant nutrient delivery systems". Life Support & Biosphere Science: International Journal of Earth Space. 3 (1–2): 53–59. PMID 11539161.
- ^ Hoagland, D.R. (1920). "Optimum nutrient solutions for plants". Science. 52 (1354): 562–564. Bibcode:1920Sci....52..562H. doi:10.1126/science.52.1354.562. PMID 17811355.
{{cite journal}}
: CS1 maint: uses authors parameter (link) - ^ Rockel, P. (1997). "Growth and nitrate consumption of sunflowers in the rhizostat, a device for continuous nutrient supply to plants". Journal of Plant Nutrition. 20 (10): 1431–1447. doi:10.1080/01904169709365345. ISSN 0190-4167.
- ^ Steiner, A. A. (1984). "The universal nutrient solution". In: Proceding 6th International Congress Soilless Culture, ISOSC, Wageningen, pp. 633-649.
- ^ Mc Near, D. H. Jr. (2013). "The Rhizosphere - roots, soil and everything in between". Nature Education. 4 (3): 1.
- ^ Waldner, H.; Günther, K. (1996). "Characterization of low molecular weight zinc species in normal commercial vegetable foodstuffs". Zeitschrift für Lebensmittel-Untersuchung und Forschung. 202 (3): 256–262. doi:10.1007/BF01263550. PMID 8721222.
- ^ Hoagland & Arnon (1950). The water-culture method for growing plants without soil. (Circular (California Agricultural Experiment Station), 347. ed.). Berkeley, Calif. : University of California, College of Agriculture, Agricultural Experiment Station. (Revision). Retrieved 1 October 2014.
- ^ Smith, G. S.; Johnston, C. M.; Cornforth, I. S. (1983). "Comparison of nutrient solutions for growth of plants in sand culture". The New Phytologist. 94 (4): 537–548. doi:10.1111/j.1469-8137.1983.tb04863.x. ISSN 1469-8137.
- ^ Franco-Navarro, J. D.; Brumos, J.; Rosales, M. A.; Cubero-Font, P.; Talon, M.; Colmenero-Flores, J. M. (2016). "Chloride regulates leaf cell size and water relations in tobacco plants". Journal of Experimental Botany. 67 (3): 873–891. doi:10.1093/jxb/erv502. PMC 4737079. PMID 26602947.
- ^ Kumudha, A.; Selvakumar, S.; Dilshad, P.; Vaidyanathan, G.; Thakur, M.S.; Sarada, R. (2015). "Methylcobalamin – a form of vitamin B12 identified and characterised in Chlorella vulgaris". Food Chemistry. 170: 316–320. doi:10.1016/j.foodchem.2014.08.035. PMID 25306351.
- ^ Hewitt E. J. (1966). Sand and Water Culture Methods Used in the Study of Plant Nutrition. Farnham Royal, England: Commonwealth Agricultural Bureaux, pp. 547. Technical Communication No. 22 (Revised 2nd Edition) of the Commonwealth Bureau of Horticulture and Plantation Crops.
- ^ Murashige, T; Skoog, F (1962). "A revised medium for rapid growth and bio assays with tobacco tissue cultures". Physiologia Plantarum. 15 (3): 473–497. doi:10.1111/j.1399-3054.1962.tb08052.x. S2CID 84645704.
- ^ Adania, Fabrizio; Genevinia, Pierluigi; Zaccheoa, Patrizia; Zocchia, Graziano (1998). "The effect of commercial humic acid on tomato plant growth and mineral nutrition". Journal of Plant Nutrition. 21 (3): 561–575. doi:10.1080/01904169809365424.
- ^ Lee, Seungjun; Lee, Jiyoung (November 2015). "Beneficial bacteria and fungi in hydroponic systems: Types and characteristics of hydroponic food production methods". Scientia Horticulturae. 195: 206–215. doi:10.1016/j.scienta.2015.09.011. ISSN 0304-4238.
- ^ a b Soderstrom, Linus (2020). "Plant-Growth Promoting Rhizobacteria in Soilless Cannabis Cropping Systems" (PDF).
{{cite journal}}
: Cite journal requires|journal=
(help) - ^ ShuHua, KaiJiun, Wei, HuuSheng, ChiTe, Hsu, Lo, Fang, Lur, Liu (2015). "Application of phototrophic bacterial inoculant to reduce nitrate content in hydroponic leafy vegetables". Crop, Environment, and Bioinformatics. 12: 30–41.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ Moncada, Alessandra; Vetrano, Filippo; Miceli, Alessandro (2020-10-06). "Alleviation of Salt Stress by Plant Growth-Promoting Bacteria in Hydroponic Leaf Lettuce". Agronomy. 10 (10): 1523. doi:10.3390/agronomy10101523. ISSN 2073-4395.
- ^ a b Kumar, Ramasamy Rajesh; Cho, Jae Young (2014). "Reuse of hydroponic waste solution". Environmental Science and Pollution Research. 21 (16): 9569–9577. doi:10.1007/s11356-014-3024-3. PMID 24838258. S2CID 46558335.
- ^ "HydroBuddy v1.62 : The First Free Open Source Hydroponic Nutrient Calculator Program Available Online". scienceinhydroponics.com. Mar 30, 2016. Retrieved Nov 22, 2018.
- ^ "HydroCal: Hydroponic Nutrient Formula Calculator". SourceForge. Feb 2, 2010.
- ^ Peiro, Enrique; Pannico, Antonio; Colleoni, Sebastian George; Bucchieri, Lorenzo; Rouphael, Youssef; De Pascale, Stefania; Paradiso, Roberta; Godia, Francesc (2020). "Air distribution in a fully-closed higher plant growth chamber impacts crop performance of hydroponically-grown Lettuce". Frontiers in Plant Science. 11 (537): 537. doi:10.3389/fpls.2020.00537. PMC 7237739. PMID 32477383.
![](/images/thumb/c/ce/JP-blk-logo-lft-margin-wider3.svg/40px-JP-blk-logo-lft-margin-wider3.svg.png)
![](https://upload.wikimedia.org/wikipedia/commons/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- CS1: long volume value
- CS1 maint: uses authors parameter
- CS1 errors: missing periodical
- CS1 maint: multiple names: authors list
- Articles with short description
- Articles needing more detailed references
- All articles with unsourced statements
- Articles with unsourced statements from April 2016
- Articles with unsourced statements from January 2017
- Articles with unsourced statements from October 2012
- Pages using div col with small parameter
- Commons category link is defined as the pagename
- AC with 0 elements
- Hydroponics
- Hydroculture
- Aeroponics